This is the Hot side plunger often found in Crane Concorde single handle tub shower valves.
Sold by the each. Plunger is 1.05 inches long, thread has a diameter of .180, and threads per inch is 30.
Warning; Crane made other single control valves, yours must match the below pictured internal parts for our parts to work.
Crane made several different versions of their single control mixing valves, and there is limited availability of parts for some of them. Pictured below is the “Concorde” model Crane valve. This particular valve assembly did NOT use ceramic handles or escutcheons. It was produced from the mid 1930’s through the 1950’s, and it did span both Pre- and Post World War 2. Sometime during the late 1950’s or early 1960’s, this valve was discontinued and replaced by the Crane Dialette single control valve. The Concorde was made in both exposed and in-wall versions and could be found in both 3/4” and 1/2” pipe. As far as we know, this plunger only works with the 1/2″ version. Handles, packing nuts, and escutcheons are no longer made, but we can often replate the existing parts.
E-mail or call for details.
#1. Crane Concorde Lever handle. Not Available, but existing levers can often be replated
#2. Crane Concorde Stem. Chrome only. #65-F4406 $102.00
#3. Packing spring, 13/16” OD by 1 11/16” tall #65-F5057 $6.99
#4. Graphite packing gland, 7/8” OD by 1/2” ID #65-A148 $6.83
#5. Sealing washer, upper body and lower body. 2 3/8” OD, 2 1/8” ID #65-F1391 $0.99
#6. Seat washer, just over 3/4” OD #65-A323 $2.30
#7. Hot side Seat and Screw #65-FB1757 Discontinued by manufacturer, NLA
#8. #8. For 1/2″ version only: Cold Plunger #86-FB1759 Hot Plunger #86-FB1756