Due to the large number in our collection, it is impossible to list or picture feet individually. It is important to understand that tub feet are not standardized: Different makes and models of tubs use different mounting schemes and hardware to attach the feet to the tub.
In order for us to find matching feet for your tub, we will first need a digital (.jpg or.bmp format please) picture of one of the mates to the missing or broken foot along with written dimensions of the foot. DO NOT hold the tape measure next to the foot and expect us to extrapolate the dimensions from a blurry picture that’s not taken from the appropriate angle. (Yes, we need you to do your homework!) Please see the below sample picture of how we measure tub feet.
Send this information to firstname.lastname@example.org Sorry, the casting numbers on the bottom of the tub DO NOT help. He will look at the foot and determine if you need to send it in to us for matching.
If your tub is missing all four feet, please click HERE. Please note that some tubs use differently-sized feet at one end to facilitate drainage. (Try swapping feet to different mounting locations to determine if all four feet are identical.) If it appears that the tub has differently sized or shaped feet at one end, we will need one foot from each end of the tub. Packing and shipping instructions are near the bottom of this page. Note: Pictures of feet submitted via FAX or email may be used for preliminary evaluations but are not a suitable substitute for actually sending a sample!
Though we have nearly a 75% success rate finding replacement feet, we can’t guarantee that we will find a match, only that we will try our best. If a suitable foot or set of feet cannot be found we can use your sample foot as a pattern to have new feet cast from iron or brass.
Original feet will most likely have rust and/or old paint on them but are guaranteed to be sound. We can sandblast and paint the feet for an additional charge.
This is what your tub foot picture should look like
The tape measure next to the foot is really for scale, we’ll need you to actually read the overall height and include the WRITTEN dimension in your e-mail. It’s okay if the foot isn’t touching the flat surface on the sides, a picture like this gives us the ability to determine the angle of the tongue.
Send a picture like this in to:
|Original Antique Cast Iron Feet, Each:||$75|
|Original Antique Cast Iron Feet, Set of 4:||$250|
|We Can Sandblast Original Feet to Bare Metal for an additional labor charge. Prices will vary depending on how many coats of paint are on foot.|
|Original Feet Can be Chrome or Nickel Plated for an Additional $150 ea.|
|New Foot, Cast From Original Sample, Silicone Bronze (rough)||$115 ea.|
|New Bronze Feet Can be Nickel Plated for an additonal $90 ea.|
|Prices FOB Murphys, CA.|
Feet should be wrapped in paper or foam and packed in a heavy cardboard container. Include a note of explanation that includes your Name, Address, Telephone Number, Return shipping information, and a photo of the tub if possible. Ship the sample feet via insured UPS to the address below:
DEA Bathroom Machineries
495 Main Street
Murphys, CA 95247
Customer is responsible for both inbound and return freight. DEA is not responsible for feet lost or broken in shipping. Please allow up to one week for us to go through our collection and attempt to find a match. Allow 4-8 weeks for casting of new feet.