Home

 

Site Index

 

Videos

 

Original Antiques

 

F.A.Q’S

 

Tubs

 

Crane Plumbing Parts

 

Standard
Plumbing
Parts

 

Restoration
Dept.

 

Thomas Crapper

 

Showers

 

Toilets and  Toilet Parts

 

Sinks and Accessories

 

Faucets and Faucet parts

 

General Store

 

Hardware and Electrical

 

Fire Hose Reels

 

Antique Keys

 

Bath Decor and Accessories

 

About Us

 

Ordering & shipping Information

 

Bargains

some of the products sold on this website may contain one or more chemicals known to the state of California to cause cancer, birth defects, or reproductive harm
BMblog
fb1
closeout

Transaction Processing
 

a_back9

Sink Hangers, Brackets, Legs, and Mounting Hardware.

Console Type Leg Kit with Towel Bars
Double leg kit measures 36” wide with 36” tall legs. Side towel bars are 24” long.  All tubes may be cut down to desired lengths. Legs have 1-1/2” screw adjustment for leveling. Constructed of 1” diameter brass tubing and solid cast brass fittings. A simple yet elegant design that is at home in both vintage or contemporary decorating schemes. Suitable for marble tops or china sinks.  Sold in pairs
15-275B Unlacquered polished brass leg kit 745.00 addtocartmini
15-275L Coated polished brass leg kit  745.00  addtocartmini
15-275C Polished Chrome leg kit  745.00  addtocartmini       
15-275N Polished nickel leg kit  745.00    addtocartmini
15-275BN Brushed nickel leg kit 795.00  addtocartmini
shopjobShop Item 
Custom Sizes and design available. Call or email for details.

Console Sink Legs
Leg kit features 1” O.D. brass tubing and solid cast brass fittings. Legs are 36” long and may be cut to any desired length. Top caps have 1-1/2” of adjustment for leveling. Simple, clean lines are at home in both vintage and contemporary decorating schemes. Suitable for marble tops or china console sinks.  Sold in pairs.
15-75B Unlacquered polished brass leg kit 395.00 addtocartmini
15-75L Coated polished brass leg kit  395.00  addtocartmini
15-75C Polished Chrome leg kit  395.00    addtocartmini     
15-75N Polished nickel leg kit  395.00    addtocartmini
15-75BN Brushed nickel leg kit 445.00   addtocartmini
shopjobShop Item
Custom Sizes and design available. Call or email for details.

Rope Brass Sink Leg Kits
We can custom make these brass legs to fit your marble top or wall-hung china basin. Kits come complete with brass and glass claw and ball feet, 1-1/8” rope brass tubing, and all hardware to connect to bottom of sink and wall. Vertical bar(s) are 33” tall, horizontal bars is 36”, wall bar(s) are 24”.  Cut tube to fit and assemble with set-screw tee and fittings. 
Single Leg Kit (as shown) with 2 horizontal bars, 2 wall flanges, and one leg.
15-KITL-1  Coated Brass  750.00 addtocartmini
15-KITN-1 Polished Nickel 750.00  addtocartmini
Double Leg Kit
With 3 horizontal bars, 2 wall flanges, 2 legs.
15-KITL-2 Coated Brass,  995.00 addtocartmini
15-KITN-2 Polished Nickel 995.00 addtocartmini
shopjob Shop Item
Also available without horizontal bars and in custom sizes and styles. Please call or email with your specs. for quote.

Reproduction Sink Legs
An exact replica of an original antique leg from 1935.  Made right here in Murphys California, these top-quality legs weigh over 5 lbs per pair. Fully adjustable from 24-1/2” to 28-1/2” long, top tube is 7” long machined brass, 1-1/2” diameter at top. Leg is 3/4” heavy brass tubing. Solid brass bottom tip is 3/16” diameter and sets into hole drilled in floor to keep leg from moving. Sold by the each.
15-65R Mill Finish, not coated 235.00 each.         addtocartmini
15-65L Brass, polished & Coated  295.00 each. addtocartmini
15-65N  Polished Nickel  295.00 each.              addtocartmini            

90-1648
90-1652
90-1647

China Lavatory Hanger
China Lavatory Hanger Stamped steel brackets  in 3 styles
90-1648 7" long by 3" high  9.95 each, can be nested in pairs for added strength  addtocartmini
90-1652 15" wide, fits mounting  lugs 10" on center or can be cut in half  to fit wider spacings on sideboard and large cast iron sinks. Lug pocket 2 1/4"  wide.  Nest in pairs for added strength.  12.95 each addtocartmini
90-1647 Two-piece, 1 3/4" wide  by 2 1/8" high, pair 4.50 addtocartmini

Heavy Silicone Bronze China Lavatory Bracket
This pair of brackets does the same job as the above 90-1647 set, but cast out of Silicone Bronze.  Silicone Bronze is even stronger than cast iron, you will not break these.  Intended for china lavatory sinks that have pockets cast into the back of the sink, these brackets are 1 5/8” wide by 3” tall.  Sold less screws, comes in pairs.  Blocking in wall highly recommended!
19-CB Silicone Bronze brackets 50.00 addtocartmini

19-CBnew
19-BKT

Heavy Cast Iron Sink Brackets
This set of brackets are intended for those sinks with the truly “oddball” spacings that none of the other brackets will fit.  They are 4 1/2” tall by 4 1/4” wide, and have a pocket dimension of 1 1/2” by 3/4” deep.  The pockets do have a taper to the sides, the narrowest point is 1” wide.  Sold in pairs, less screws.  Blocking in wall highly recommended.
19-BKT Sink bracket 45.00  addtocartmini

Cast Iron Sink Bracket
When we couldn’t find original brackets for our extensive supply of antique sinks, we decided to have some cast from an original pattern.  Made of 3/8” thick Cast i
ron, these beauties will outlive us all.

repot bracket

Will fit sinks that have the lugs measuring down to 7” on the inside of the lug, and up to 13 1/2” on the outside of the lug.  This will almost fit them all!  Screws not supplied, we recommend oversize screws or lag bolts and blocking in the wall.
19-2684 Cast Iron Bracket  49.00  addtocartmini

19-15

Kitchen Sink Wall Bracket
So, you just found a really cool old farmhouse sink, but there isn’t a bracket to be found

anywhere.  This is what you need!  This is the bracket for those sinks that have mounting lugs cast into the sink on a 15” center.  Will fit “Standard” sinks, may fit others.  Bracket not supplied with screws, blocking will be required in wall
19-15 Cast iron Kitchen sink bracket.  59.00 addtocartmini

Heavy Cast Brass Pedestal Sink Brackets
5 3/4" long wall-mounting  plate is 2 1/4" wide by 2 3/4" high. Sink mounting slot is  1/4" wide by 2 1/4" long. Will fit sinks with holes between 3” and 5 1/4” away from finished wall surface.  Screws not included.
79-GB635B Heavy Cast Brass, uncoated.  Pair 55.00  addtocartmini
79-GB635C Chrome plated, Pair 75.00      addtocartmini
79-GB635N Nickel plated, Pair 75.00  
  addtocartmini               

Crane Pedestal Sink Brackets
Fits many others as well!  Made of durable Stainless Steel, and designed to specifically fit Crane Pedestal sinks, these brackets are a copy of an original bracket.  Will fit any sink that has holes at least 11/16” diameter and anywhere between 1” to 5” away from the wall.  The slots cut in the back allow fine tuning when leveling the sink.  Be sure to have at least 3” of depth in the sink to allow for the toggle.  Bracket itself measures 5 3/4” long by 2” wide and sticks down 2 1/8”.  Comes with everything shown and a set of directions.
59SB Sink bracket kit 29.95 addtocartmini

59SB1

Thomas Crapper Sink & Cistern Brackets
Ornamental Cast Iron Brackets with the Thomas Crapper & Company logo. Unusual plain iron brackets with unfinished wood “patras” are the perfect addition to the Thomas Crapper bathroom. Use under high or low toilet tank, as a sink bracket, or under a glass or wood shelf. A classic design for any room or decor. Primered, ready-to-paint with unfinished wood patras.
37-754 Bracket 7-1/2” high x 7” long, pair  295.00 addtocartmini
37-791 Bracket  10” high x 13” long, pair  395.00   addtocartmini  
37-736  Cloakroom basin bracket, 4” x 4 3/4”, pair, no logo, 114.00 addtocartmini
Click here to see more Thomas Crapper & Co Items!

Deco Style Sink Leg Kit
Original style legs will fit most china or cast iron sinks. Bright Annealed type 400 magnetic stainless steel legs are 3/4” x 28” max.  long and may be cut down to length. Hexagonal 2” escutcheons are chrome plated steel. Bottom caps are chrome plated Zinc.
34-132N  Deco Legs, chrome / SS only.  55.00, pair. addtocartmini

Includes “keyhole” fasteners that fit into the slots on the underside of most pedestal and wall-hung sinks.

Bottom caps have 1/4” stud that fits into hole drilled in floor to prevent skidding if kicked.

Please note, the Deco leg set is really for our “budget-minded” customers.  What polish work that has been done is done by machine  One does get what they pay for in a basin sink leg kit.....

Click here to see our selection of original Lavatory Leg sets!

bottompage

View Cart

Account Login

Checkout

footer 4