Eljer is commonly confused with Standard valves from the 1950’s, the trim sets are very similar. Be sure to compare your parts against the pictured ones. If they aren’t an exact match, this is not the correct kit. If you cannot find a match, e-mail us a photo of your stems and trim, and we’ll see if we can identify the maker and available kit.
The stems on this kit are 4″ long, and will have 16 splines. Spread between the hot and cold valves is normally 8″. Escutcheons are 2 1/2″ wide at base, and stand 1 3/4″ tall. They screw directly onto the escutcheon nipple. Be sure to apply some sort of pipe thread sealant on the seat threads during installation. Chrome only! Imported.
Threads MUST be sealed for seat to work properly.