Home

 

Site Index

 

Videos

 

Original Antiques

 

F.A.Q’S

 

Tubs

 

Crane Plumbing Parts

 

Standard
Plumbing
Parts

 

Restoration
Dept.

 

Thomas Crapper

 

Showers

 

Toilets and  Toilet Parts

 

Sinks and Accessories

 

Faucets and Faucet parts

 

General Store

 

Hardware and Electrical

 

Fire Hose Reels

 

Antique Keys

 

Bath Decor and Accessories

 

About Us

 

Ordering & shipping Information

 

Bargains

some of the products sold on this website may contain one or more chemicals known to the state of California to cause cancer, birth defects, or reproductive harm
BMblog
fb1
closeout

Transaction Processing
 

a_back9

Specialty Faucets

54-172

Slant Back Faucet
Designed for older lavatory sinks that have the faucet holes at a 45 degree angle. 1/2” IPS inlet. 3-3/4” spout length, 45 degree cast zinc spout. Adjustable centers from 4” to 8”, requires tubing cutter to alter centers from 8”.  Includes pop-up drain and chrome cover plate for oddly shaped or extra spout holes. Faucet is designed to work on sinks with three 1-1/8” or larger in-line holes. Minimum hole diameter is 1”, will work on Crane Oxford or Beverly slantback sinks but PO plug drain (Sold separately) MUST be used.  Porcelain can be no thicker than 11/16”.  Available with compression stems or quarterturn cartridges, Chrome finish only.  USA Made.
54-172Q Slantback faucet, Quarterturn ceramic cartridges 236.00 addtocartmini
54-172 Slantback faucet, Compression stems 215.00 addtocartmini

  Looking for a Slant-Back Kitchen Faucet?
Looking for a faucet for a Crane fixture?  Click Here.

54-170

Shelf Back Faucet
Same as above but for sinks with vertical back-splashes.  Two widths available, one with centers adjustable from 4 3/4” to 6”, the other is adjustable from 6” to 8”. Includes pop up drain. Cast Zinc spout extends 2-1/8”. 1/2” IPS inlets, handle escutcheons are 1-3/4” diameter, spout base is 1-3/4” wide x 2-3/8” high. Maximum porcelain thickness is 11/16”.  Chrome finish only.  Available in both Compression stem and quarterturn cartridge versions
These faucets will replace the Standard brand metal spout shelfback faucets, but will NOT replace the ceramic spout version.  For Standard sinks with 6” center shelfback faucets, use the 54-170.  For Standard sinks with 8” center faucets, use the 54-170-8
54-170Q 4 3/4” to 6” Centers, Quarterturn cartridge Shelfback faucet 172.00 addtocartmini
54-170 4 3/4” to 6” Centers, Compression stem Shelfback faucet 152.00 addtocartmini
54-170Q-8 6” to 8” Centers, Quarterturn cartridge Shelfback faucet 179.00 addtocartmini
54-170-8 6” to 8” Centers, Compression stem Shelfback faucet 159.00 addtocartmini

Trying to replace an American Standard shelfback Ceramic spout faucet?
We have a solution!  Click here!

Old-Style Bib Faucets
Female Plain End Bib  Replacement faucet for old sideboard style sinks. Faucet  is 3 1/2" long, 1/2" FIP inlet.  Lead free!
90-7110 Polished Chrome  Plated 23.95  reserve
Adjustable Flange Plain End Bib
Replacement faucet for old side board style sinks. Faucet  is 3 1/2" long, 1/2" MIP inlet with 2" OD flange that  adjusts 3/4".
90-1002 Polished Chrome, Lead free, 23.95 reserve
Adjustable Flange Hose End Bib
Replacement faucet for high-back kitchen sinks or laundry  tubs. Faucet has male hose thread outlet, 1/2" MIP inlet  with 2" OD flange that adjusts 3/4".  Lead free!
90-7114 Polished Chrome Plated 29.95
reserve

90-bibbs
05-1203

Drinking Fountain Bubbler
Classic Fountain Faucet Classic bubbler faucet with self-closing  handle. Chrome plated cast brass with 1/2" IPS inlet.  5 3/4" high.  Lead free!
05-1203 Fountain Bubbler 65.00
reserve

90-612

Self-Closing Shower Valve
Lever handle equipped valve for outside showers
90-612
Chrome plated brass,  1/2" FIP inlet and outlet. 45.00

reserve
 

Can’t find a faucet to fit that old sink? Restore the old one!
Click here for more information.

bottompage

View Cart

Account Login

Checkout

footer 4