Site Index




Original Antiques






Crane Plumbing Parts






Thomas Crapper




Toilets and  Toilet Parts


Sinks and Accessories


Faucets and Faucet parts


General Store


Hardware and Electrical


Fire Hose Reels


Antique Keys


Bath Decor and Accessories


About Us


Ordering & shipping Information



some of the products sold on this website may contain one or more chemicals known to the state of California to cause cancer, birth defects, or reproductive harm

Transaction Processing


Authentic Thomas Crapper & Company Sanitaryware

Page 1

Page 2

New surface mount shower valve assemblies from Thomas Crapper!  Click here!

Bath Accessories by Thomas Crapper & Co. LTD.
Thomas Crapper established his now world-famous company in Chelsea in 1861. Quickly, he gained a fine reputation for quality and service, specializing in the manufacture and supply of bathroom fittings to the Royalty, Nobility, and Gentry of the time. In addition he perfected and patented a number of sanitary innovations, some still very important in the plumbing world to this day.

Today- Thomas Crapper & Co. are again producing the finest bathroom ware. Nineteenth-century designs are combined with current knowledge to create extraordinarily authentic fittings.


Complete Toilet Kit with Thomas Crapper & Co High Cistern
An incredibly faithful reproduction of the Victorian Original, right down to the “valveless water waste preventer” design.  Syphon-type flush valve eliminates troublesome flappers and tank balls while delivering a powerful 1.6 gallon flush. Cistern is cast from solid Marine Quality Aluminum. Flush lever and water inlet may be mounted on either side but both HAVE to be on same side.  Kit comes complete with ready-to-paint cistern, cast iron wall brackets, brass flush and fill tubes, 12” rough-in bowl with ceramic bolt caps, seat bumper, a genuine Thomas Crapper “pull and let go” ceramic cistern pull, and a Quartersawn Oak seat with decorative metal hinge
TC&Co. High tank kit, Uncoated polished brass  4118.00 addtocartmini
TC&Co. High tank kit, nickel  4118.00  addtocartmini
This product does not meet California's Title 20  requirements, and cannot be sold to addresses within California

High Cistern Tank Only
Crapper & Co.’s incredible reproduction of the No. 814 Victorian original. Order pull knob, brackets, flush and fill tubes separately.
37-814HT   High Tank Only   2170.00 addtocartmini


Please note;  we supply the Thomas Crapper toilets with a 12” rough American bowl.  While we can special order the Crapper bowl, it is not approved for use in the U.S.  If you are having your job inspected, the Crapper bowl will not pass!

click here for a rough-in diagram for this toilet

Complete Toilet with Thomas Crapper & Co. Low Cistern
The charming “beer engine” flush lever and tank have been reproduced right down to the syphon type flush valve. Solid Marine Quality Aluminum cistern is ready to paint to match your decor. Includes cast iron “T/C” logo wall brackets, flush tube, fill tube and  the exclusive Lydia bowl suitable for installation on 11” to 14” rough-in.  Supplied with Quartersawn Oak seat.  Click on photo for close-up of tank.
37-814LKITB   Low tank kit, Uncoated polished brass  4125.00  addtocartmini
37-814LKITN Low tank kit, Nickel  4125.00 addtocartmini
This product does not meet California's Title 20  requirements, and cannot be sold to addresses within California
37-814B Low tank only, Uncoated polished brass 2170.00 addtocartmini
37-814N Low tank only, polished Nickel  2170.00 addtocartmini


Thomas Crapper & Co. China Low Cistern Complete Toilet
Crapper and Co. has come out with a wonderful tank, flushing with slightly over 1 gallon.  The Crew here at Bathroom Machineries mated this tank with the Lydia bowl to make a Americanized version of the Thomas Crapper toilet.  No more problems with European rough -in distances!  Supplied with Cast Iron brackets, flush and fill tubes in your choice of Polished Brass or Nickel, and a toilet bowl.  Supply is on right, supplied with Quartersawn Oak seat
37-397LKITB Low tank kit, Uncoated Polished Brass 4125.00 addtocartmini
Low tank kit, Nickel 4125.00 addtocartmini
This product does not meet California's Title 20  requirements, and cannot be sold to addresses within California

37-152 new

Thomas Crapper China High Tank
Finally, a porcelain version of the hightank toilet kit.  Flush lever and water inlet have to be mounted on left side. Kit comes complete with china cistern, cast iron wall brackets, brass flush and fill tubes, 12” rough-in bowl with ceramic bolt caps, seat bumper and a genuine Thomas Crapper “pull and let go” ceramic cistern pull. Completely compatible with North American plumbing.  Flushes with less than 1.6 gallons.  Click on photo for a larger view, or click here for a close-up of the tank.  Supplied with Quartersawn oak seat and decorative metal hinge

37-152KITB  Crapper China high tank w/ Lydia bowl, Uncoated Pol. Brass 4118.00 addtocartmini
37-152KITN Crapper China high tank w/ Lydia bowl, Nickel  4118.00  addtocartmini
This product does not meet California's Title 20  requirements, and cannot be sold to addresses within California
37-152B Crapper and Co. China tank only, Uncoated Brass  1850.00 addtocartmini
Crapper and Co. China tank only, Nickel  1850.00 addtocartmini

Thomas Crapper & Co. High Tank Toilet Pull
Porcelain Pull reads: “Pull and Let Go.”
Rubber bumper prevents damage should pull swing and hit wall or flush pipe. 30” folded link chain, finest quality. Add a classic touch to your high tank water closet.
37-231C Chrome Pull knob 235.00 addtocartmini
37-231N Polished nickel Pull 235.00 addtocartmini
37-231B Uncoated Polished Brass Pull 235.00 addtocartmini

Thomas Crapper Undermount Basin
14” I.D. x 16 5/8” O.D. Round Inset Basin No. 205
 Made by hand with the usual Crapper & Co. fastidiousness. Bears the Thomas Crapper & Company logo beneath the overflow.  Genuine T.C. & Co. Victorian waste assembly with long chain sold separately, see below
37-205   T.C. & Co. No. 205 basin 1065.00 addtocartmini
Oval undermount available as well, the sink measures 17 1/2” x 12 1/2” ID.  Not pictured
37-849 T.C. & Co. No. 849 basin 1065.00 addtocartmini

Undermount hardware may be found on our Sink Basins Page.

Thomas Crapper & Company  Wall Hung Basin
This beautiful wall hung basin comes in two sizes and can be mounted on the Thomas Crapper Brackets below (sold separately) or on our large brass brackets, or on your cabinet. The tap holes are 6-1/4” apart and 1-3/16 in diameter. Backsplash is 4” at it’s highest point. Note the detailed soap dish and, of course, the Thomas Crapper logo. Use single basin faucets, sold separately
37-838    17” x 22-1/2” Basin  1330.00 addtocartmini
37-838L 19-1/2” x 25” Basin  1610.00  addtocartmini
Three hole version of the sink at right, will accept widespread faucets
37-838-3 17” x 22 1/2” Basin 1330.00 addtocartmini
37-838L-3 19-1/2” x 25” Basin 1610.00 addtocartmini
Drain sold separately, see below.


Thomas Crapper Basin Waste Assembly
This is the drain that fits correctly into the above Crapper basin sink.  It’s by far the heaviest sink drain that you may ever see.  Supplied with chainstay, plug, and beautifully plated lap link chain, this is one nice drain.  Outlet is 1 1/4” tube.
37-823C Chrome Crapper Drain 195.00  addtocartmini
37-823L Uncoated Brass Crapper Drain 195.00 addtocartmini
37-823N Nickel Crapper Drain 195.00 addtocartmini

TC cloakroom

Thomas Crapper Cloakroom Basin
Perfect for the tiny bath, these sinks measure 20 1/2” wide and protrude out a measly 10 1/4”  Sold less pictured faucets, brackets and drain.  Bracket and drain sold separately or can be substituted with your own.  Note, sink requires brackets to support it.
37-861 Cloakroom Basin 1150.00 addtocartmini


Installation tip; in order to accommodate a highbox flange where the waste arm meets the stub out, one must offset the rough drain outlet 2” to 2 1/2” off the centerline of the sink.  Minimum distance from the deck of the sink to the center of the rough waste line is 8”.  This will keep the trap tucked under the sink cleanly.  Blocking 21” wide by 7” tall is required in wall as well.

Photo shows the detail of the Thomas Crapper bracket, Part # 37-736, sold separately for the above Cloakroom sink

Thomas Crapper Sink & Cistern Brackets
Ornamental Cast Iron Brackets with the Thomas Crapper & Company logo. Unusual plain iron brackets with unfinished wood “patras” are the perfect addition to the Thomas Crapper bathroom. Use under high or low toilet tank, as a sink bracket, or under a glass or wood shelf. A classic design for any room or decor. Primered, ready-to-paint with unfinished wood patras.
37-754 Cistern Bracket 7-1/2” high x 7” long, pair  240.00 addtocartmini
37-791 Basin/Seat Bracket  10” high x 13” long, pair 365.00  addtocartmini   
37-736  Cloakroom basin bracket, 4” x 5”, pair, 140.00 addtocartmini


Thomas Crapper Glass shelf w/ Tumbler Hdr.
Finest Quality!  Just like the originals made by Mr. Crapper himself.  These are comparable to items made by J.L. Mott, which were the finest made on these shores.  Roughly 24” wide.  Available in Chrome or Nickel
37-241C Glass Shelf 650.00 addtocartmini
37-241N Glass Shelf 650.00 addtocartmini

Bury Street London Nickel and Oak Toilet Paper holder
This is a replica of a Victorian era toilet tissue holder.  Mounted on a plaque of Solid Red Oak, this holder exudes the style of the Gilded Age.  This holder has been plated in Polished Nickel which is period correct.  The backing plate is 8” wide by 7” tall, and the holder extends out 5”.  This would be the perfect addition to any Victorian bath, and we have only one. 
DI13121 Victorian Toilet tissue holder 399.00 addtocartmini


Thomas Crapper and Company LTD. is a registered trademark of the
Thomas Crapper Company. http://www.thomas-crapper.com/introduction.asp

View Cart

Account Login


footer 4