Home

 

Site Index

 

Videos

 

Original Antiques

 

F.A.Q’S

 

Tubs

 

Crane Plumbing Parts

 

Standard
Plumbing
Parts

 

Restoration
Dept.

 

Thomas Crapper

 

Showers

 

Toilets and  Toilet Parts

 

Sinks and Accessories

 

Faucets and Faucet parts

 

General Store

 

Hardware and Electrical

 

Fire Hose Reels

 

Antique Keys

 

Bath Decor and Accessories

 

About Us

 

Ordering & shipping Information

 

Bargains

some of the products sold on this website may contain one or more chemicals known to the state of California to cause cancer, birth defects, or reproductive harm
BMblog
fb1
closeout

Transaction Processing
 

a_back9

"P" & “S” Traps, Tailpieces, and Other Tubular Goods

51-8912

Cast Brass “P” Trap w/ Decorative Finial
These traps are intended for exposed applications.  Available in both 1 1/2” and 1 1/4”.  Decorative removable cleanout plug at bottom of trap, arm is 17 gauge and 12” long for long runs.  1 1/2” by 1 1/4” reducing nut to adapt from 1 1/4” tailpieces to 1 1/2” trap available below, our #81-301.  US made.

86-92C
p_traps_website_2

51-8912C 1 1/2” Chrome trap 118.00 reserve
51-8912N 1 1/2” Nickel trap 138.00 reserve
51-8912L 1 1/2” Coated Brass trap 138.00 reserve
51-8912B 1 1/2” Uncoated Brass trap 154.00 reserve
51-8912BN 1 1/2” Brushed Nickel trap 154.00 reserve

51-8872C 1 1/4” Chrome trap 118.00 reserve
51-8872N 1 1/4” Nickel trap 138.00 reserve
51-8872L 1 1/4” Coated Brass trap 138.00 reserve
51-8872B 1 1/4” Uncoated Brass trap 154.00 reserve
51-8872BN 1 1/4” Brush Nickel trap 154.00 reserve

51-3650

Cast Brass “S” Trap with Decorative Cleanout Finial Plug
Two sizes available, these are intended for exposed applications.  Comes with the above decorative cleanout plug to give this S trap that antique look and feel.  Modeled after a 1910 original.
81-3650C 1 1/2” Chrome S trap 182.50 reserve
81-3650N 1 1/2” Nickel S trap 218.50 reserve
81-3650L 1 1/2” Coated Brass S trap 218.50 reserve
81-3650B 1 1/2” Uncoated Brass S trap 225.50 reserve
81-3650BN 1 1/2” Brush Nickel S trap 225.50 reserve

81-3648C 1 1/4” Chrome S trap 182.50 reserve
81-3648N 1 1/4” Nickel S trap 218.50 reserve
81-3648L 1 1/4” Coated brass S trap 218.50 reserve
81-3648B 1 1/4” Uncoated Brass S trap 225.50 reserve
81-3648BN 1 1/4” Brush Nickel S trap 225.50 reserve

Tubular Brass “P” Trap
This is your basic P trap, but made out of 17 gauge brass rather than the thinner 20 or 22 gauge material found at many “big box” stores.  Two sizes available.
81-2566C 1 1/2” Chrome P trap 83.00 reserve
81-2566N 1 1/2” Nickel P trap 97.00 reserve
81-2566L 1 1/2” Coated Brass P trap 97.00 reserve
81-2566B 1 1/2” Uncoated Brass P trap 128.00 reserve
81-2566BN 1 1/2” Brush Nickel P trap 110.00 reserve
81-2566O 1 1/2” Oil Rub Bronze P trap 97.00 reserve

81-254C 1 1/4” Chrome P trap 63.00 reserve
81-254N 1 1/4” Nickel P trap 77.00 reserve
81-254L 1 1/4” Coated Brass P trap 77.00 reserve
81-254B 1 1/4” Uncoated Brass P trap 113.50 reserve
81-254BN 1 1/4” Brush nickel P trap 87.00 reserve
81-254O 1 1/4” Oil Rub Bronze P trap 77.00 reserve

81-254
81-367

1 1/2” Flanged Tailpiece
This is the connector used between a trap and either a kitchen or bar drain.  8” long
81-367C Chrome Tailpiece  29.50 reserve
81-367N Nickel Tailpiece 35.00 reserve
81-367L Coated Brass Tailpiece 35.00 reserve
81-367B Uncoated Brass Tailpiece 42.00 reserve
81-367BN Brush Nickel Tailpiece 42.00 reserve

36-7421C

1 1/2” by 1 1/4” Reducing Flanged Tailpiece
Used in the occasional application where a bar drain is being used in conjunction with a 1 1/4” trap.  Also used when reducing our reproduction Crane drain to 1 1/4”.  8” long
36-7421C Chrome reducing tailpiece 22.95 reserve
36-7421N
Nickel reducing tailpiece 32.95 reserve
36-7421L Coated Brass reducing tailpiece 42.95 reserve
36-7421B Uncoated Brass reducing tailpiece 42.95 reserve
36-7421BN Brush Nickel reducing tailpiece 42.95 reserve

81-267

Extension for Drain Tubing
8” long, both 1 1/2” and 1 1/4” versions available.  Used when stock tailpiece isn’t long enough to reach the trap.  17 gauge
81-267C 1 1/2” Chrome extension 39.50 reserve
81-267N 1 1/2” Nickel extension 42.00 reserve
81-267L 1 1/2” Coated Brass extension 42.00 reserve
81-267B 1 1/2” Uncoated Brass extension 46.50 reserve

81-268C 1 1/4” Chrome extension 38.00 reserve
81-268N 1 1/4” Nickel extension 40.00 reserve
81-268L 1 1/4” Coated Brass extension 40.00 reserve
81-268B 1 1/4” Uncoated Brass extension 42.50 reserve

Threaded Tailpiece
Three diameters available, threaded both ends, 12” long.  27 threads per inch.
81-371C 1 1/2” Chrome threaded tailpiece 48.00 reserve
81-371N 1 1/2” Nickel threaded tailpiece 49.00 reserve
81-371L 1 1/2” Coated Brass threaded tailpiece 49.00 reserve
81-371B 1 1/2” Uncoated Brass threaded tailpiece 58.00 reserve

90-9026C 1 3/8” Chrome threaded tailpiece 22.00 reserve
90-9026N 1 3/8” Nickel threaded tailpiece 32.00 reserve
90-9026L 1 3/8” Coated Brass threaded tailpiece 45.00 reserve

81-369C 1 1/4” Chrome threaded tailpiece 42.00  reserve
81-369N 1 1/4” Nickel threaded tailpiece 45.00 reserve
81-369L 1 1/4” Coated Brass threaded tailpiece 45.00 reserve
81-369B 1 1/4” Uncoated Brass threaded tailpiece 52.00 reserve

81-369
90-F25

Reducing Threaded Tailpiece for Mid-Century Bathroom Sinks
Crane and Standard used an oddball tailpiece on many of their wall-hung and pedestal sinks.  It’s actually a reducing tailpiece, necking the 1 1/2’ fine thread drain outlet down to 1 1/4”.  This part was commonly used from 1925 or so until the early 1970’s. Measures 12” long, 17 gauge.
90-F25C Threaded Tailpiece, Chrome, 35.00 reserve
90-F25N Threaded Tailpiece, Polished nickel 45.00
reserve

81-265

Cover Case for 1 1/2” pipe
Cover cases are used when plastic or galvanized drain piping is extending out from wall too far and needs to be hidden.  This is more common in older homes with steel or cast drain lines.  This tube can also be used for connecting top spud toilets when the tank and bowl are in vertical alignment.  2” diameter, 10” long.
81-265C Chrome cover case 27.50 reserve
81-265N Nickel cover case 36.00 reserve
81-265L Coated Brass cover case 36.00 reserve
81-265B Uncoated Brass cover case 42.50 reserve
81-265BN Brush Nickel cover case 42.50 reserve

81-300

Slip Joint Nut and Washer
These are the nuts commonly found on the bottom side of drains and also where the trap connects together.  Cast brass rather than Zinc or plastic.  5 sizes available

Cat. No.

Description

Chrome
 (C)

Nickel
 (N)

Coated Brass
 (L)

Uncoated Brass  (B)

81-300

1 1/4" x 1 1/4" brass slip  joint nut with washers

6.00
reserve
 

9.00
 reserve

9.00
reserve
 

14.00
reserve
 

81-301

1 1/2" x 1 1/4" brass slip  joint nut with rubber washer only

6.50
reserve
 

9.50
reserve 

9.50
reserve
 

14.00
reserve
 

90-010

1 1/2" x 1 3/8" brass slip  joint nut with rubber washer only

4.50
reserve
 

8.00
reserve 

8.00
reserve
 

N/A

81-302

1 1/2"x1 1/2" brass slip joint  nut with washers

7.00
reserve
 

10.00
reserve 

10.00
reserve
 

16.00
reserve
 

90-008

2" x 2" brass slip joint nut  with washers

7.95
reserve 

12.00
reserve 

14.00
reserve
 

17.00
reserve
 

bottompage

View Cart

Account Login

Checkout

footer 4