Home

 

Site Index

 

Videos

 

Original Antiques

 

F.A.Q’S

 

Tubs

 

Crane Plumbing Parts

 

Standard
Plumbing
Parts

 

Shop Services

 

Thomas Crapper

 

Showers

 

Toilets and  Toilet Parts

 

Sinks and Accessories

 

Faucets and Faucet parts

 

General Store

 

Hardware and Electrical

 

Fire Hose Reels

 

Antique Keys

 

Bath Decor and Accessories

 

About Us

 

Ordering & shipping Information

 

Bargains

some of the products sold on this website may contain one or more chemicals known to the state of California to cause cancer, birth defects, or reproductive harm

Transaction Processing
 

Handheld Shower Heads, Hoses, & Accessories

Handheld “Telephone” Shower Heads and Hoses
Hand shower with 2-1/2” dia. face. Our finest handheld has a ceramic handle and black rubber bumper around the head to prevent marring should the head be accidentally dropped. 1/2” MIP inlet.

 

Coated Brass

Chrome

Nickel

Brushed Ni

Oil Rub Brz

79-P144

75.00
reserve
 

75.00
reserve
 

75.00
reserve
 

95.00
reserve
 

105.00
reserve
 

Hand Shower Hose.  60” hose, 1/2” FIP both ends.  Note: works best with
79-series mounts and cradles sold below.

79-P144H

41.25
reserve
 

41.25
reserve
 

41.25
reserve
 

55.50
reserve
 

55.50
reserve
 

Mounts and cradles for hand showers.
Wall Mount Cradle.
Extends from wall 5”, 6” tall.  Discontinued, limited stock

 

Coated Brass

Chrome

Nickel

Brushed Ni

Oil Rub Brz

79-P144W

50.00
reserve
 

N/A

N/A

N/A

N/A

Riser Mount Cradle. Fits 5/8” O.D. (3/8” IPS) riser. extends out 5”, 5-1/2” tall.

79-P144R

50.00
reserve
 

50.00
reserve
 

50.00
reserve
 

60.00
reserve
 

58.00
reserve
 

Faucet Mount Cradle. 3/4” FIP inlet, 1/2” MIP outlet.
Fits 79-series tub faucets with shower diverter outlet.

79-P144I

50.00
reserve
 

50.00
reserve
 

50.00
reserve
 

60.00
reserve
 

50.00
reserve
 

Wall Mount Holder. Allows handset to be used as as fixed showerhead. Designed to work with 79-P144H hose sold above. May not work if other brands of hose are used

79-P144A

76.00
reserve
 

76.00
reserve
 

76.00
reserve
 

86.00
reserve
 

 

Clamp-on hand shower holder. Clamps to riser or shower ring.
 Clamp swivels to accommodate vertical or horizontal mounts.  Designed to work with 79-series hose sold above, may not work properly  if other brands of shower hose are used.

Clamp Diam.

5/8” ring clamp

3/4” split

7/8” split

1” split clamp

79-JBC chrome

96.00
reserve
 

96.00
reserve
 

96.00
reserve
 

96.00
reserve
 

79-JBB brass

96.00
reserve
 

96.00
reserve
 

96.00
reserve
 

96.00
reserve
 

79-JBN nickel

96.00
reserve
 

96.00
reserve
 

96.00
reserve
 

96.00
reserve
 

Hand Held Conversion Shower
Use this handheld conversion kit with any of our leg tubs for hand held convenience in addition to a stationary head. Will fit 3/8” IPS (5/8” O.D.) risers only. Includes handheld head, hose, riser mount cradle, and compression fittings to allow installation in riser.
79-P156L   Coated Brass hand shower  209.25  reserve
79-P156C   Chrome hand shower           209.25   reserve
79-P156N    Nickel hand shower           209.25  reserve
79-P156BN Brushed nickel hand shwr.   250.00 reserve

Shower Diverters attach to your existing 1/2” IPS male shower arm and provide two 1/2” outlets; one for the handshower hose and one for the shower head.  Solid Brass Push-pull Diverter.
79-P68L
  Diverter, coated brass 26.00     reserve
79-P68C Diverter, polished chrome 26.00 reserve
79-P68N Diverter, Polished nickel  26.00 reserve
79-P68BN Diverter, Brush Nickel  32.00 reserve

Vacuum Breaker
For hand-held shower. Fits between  flexible hose and diverter valve. Required by plumbing  code.

79-P606

Brass

Chrome

Nickel

Br. Nickel

Oil Rub Bronze

 

17.25
reserve
 

17.25
reserve
 

17.25
reserve
 

18.75
reserve
 

18.75
reserve
 

Couplings and Fittings for Shower Risers, Diverters, & Rod Supports

81-030

81-030

Number

Description

Ctd. Brass

Chrome  (C)

Nickel  (N)

Compression  Coupling
The coupling at the left can be used to connect  any two 5/8" tubes together. Uses may be to raise  the height of your shower riser or to extend the  length of a ceiling support. The compression couplings  can also be used to repair two-piece risers that  leak at the thread. No threading is necessary as  these couplings can be installed with two adjustable  wrenches. You may have to cut off the leaky thread  with a hacksaw and leave a smooth surface for the brass ferrule to connect to. Use soap on the threads  of the coupling and ferrule to help break down the  friction for easier tightening of the nuts.

77-CC

5/8" Compression  coupling

12.95
reserve
 

-

15.95
reserve
 

Miscellaneous Couplings,  Styles may vary

79-63

3/4" FIP x 1/2" MIP

8.00
reserve
 

8.00
reserve
 

10.00
reserve
 

05-6688

1/2" Comp x 1/2" FIP

12.95
reserve
 

-

15.95
reserve
 

05-6888

1/2" Comp x 1/2" MIP

12.95
reserve
 

-

15.95
reserve
 

Number

Description

Ctd. Brass

Chrome  (C)

Nickel  (N)

Diverter Valve Couplings
Use these couplings when connecting  the diverter valve midway in a 5/8” O.D. shower riser. No  threading is necessary.

77-CFIP

5/8" compression x 1/2"  FIP

12.95
reserve
 

-

15.95
reserve
 

77-CMIP

5/8" compression x 1/2"  MIP

13.95
reserve
 

-

16.95
reserve
 

Brass, Nickel, and Chrome Tubing
5/8" OD brass tubing is threaded  one end and can be used for ceiling or wall supports.  Add a 10" length to the bottom of your shower riser  to increase the height of your shower. Works great  to keep the shower curtain out of the bottom of  the tub too. Tubing is 3/8" IPS and can be cut to  fit with a hacksaw. Fits our 77 series shower ring  tees, risers and flanges.

77-WS10

10" (brass is coated)

19.00
reserve
 

12.00
reserve
 

20.00
reserve
 

77-WS18

18" (brass is coated)

26.00
reserve
 

21.00
reserve
 

27.00
reserve
 

77-CS30

30" (brass is coated)

41.00
reserve
 

35.00
reserve
 

43.00
reserve
 

77-CS48

48" (brass is coated)

66.00
reserve
 

56.00
reserve
 

75.00
reserve
 

77-CS60

60" (brass is coated)

90.00
reserve
 

80.00
reserve
 

114.00
reserve
 

Number

Description

Ctd. Brass

Chrome  (C)

Nickel  (N)

81-043

81-043

75-42150

90-3004

SHOWER  DRAIN PARTS

Catalog
Number

Description  (Finish Code)

Chrome
Price

Nickel
Price

Coated Brass Price

81-030

Trim set: grill, crown,  screws for PLUMBING PRODUCTS drains

 16.00
reserve

34.00
reserve

 34.00
reserve

81-043

4 1/4"  Strainer, fits Casper drain receptor below.  Measures 2 7/8” between prongs

 16.00
reserve

 18.50
reserve

 18.50
reserve

90-3004

 Rough Brass CASPER Receptor  Shower Drain.  Chrome grille.

 32.00
reserve

Add above grille if finish

other than chrome is desired

Other finishes and styles of shower drains available on a special order basis

We carry a full line of 1/2” Chrome, Brass, Nickel, and Brushed Nickel
Pipe Fittings and Nipples.  Click here to go to our Finish Fittings Page.

bottompage

View Cart

Account Login

Checkout

footer 4