Handheld “Telephone” Shower Heads and Hoses
Hand shower with 2-1/2” dia. face. Our finest handheld has a ceramic handle and black rubber bumper around the head to prevent marring should the head be accidentally dropped. 1/2” MIP inlet.

Coated Brass

Chrome

Nickel

Brushed NI

Oil Rub Brz

79-P144

75.00
 

75.00
 

75.00
 

95.00
 

105.00
 

Hand Shower Hose.   60” hose, 1/2” FIP both ends. Note: works best with
79-series mounts and cradles sold below.

79-P144H

50.00
 

38.00
 

54.00
 

60.00
 

58.00
 

Mounts and cradles for hand showers.
Wall Mount Cradle. Extends out from wall 5”, 6” tall.

Coated Brass

Chrome

Nickel

Brushed NI

Oil Rub Brz

79-P144W

50.00
 

50.00
 

50.00
 

60.00
 

50.00
 

Riser Mount Cradle. Fits 5/8” O.D. (3/8” IPS) riser. extends out 5”, 5-1/2” tall.

79-P144R

50.00
 

50.00
 

50.00
 

60.00
 

58.00
 

Faucet Mount Cradle. 3/4” FIP inlet, 1/2” MIP outlet.
Fits 79-series tub faucets with shower diverter outlet.

79-P144I

50.00
 

50.00
 

50.00
 

60.00
 

50.00
 

Wall Mount Holder. Allows handset to be used as as fixed showerhead. Designed to work with 79-P144H hose sold above. May not work if other brands of hose are used.

79-P144A

76.00
 

76.00
 

76.00
 

86.00
 

NEW! Clamp-on hand shower holder. Clamps to riser or shower ring.
 Clamp swivels to accommodate vertical or horizontal mounts. Designed to work with 79-series hose sold above, may not work properly if other brands of shower hose are used.

Clamp Size:      

5/8”

3/4”

7/8”

1”

79-JBC chrome

96.00
 

96.00
 

96.00
 

96.00
 

79-JBB brass

96.00
 

96.00
 

96.00
 

96.00
 

79-JBN nickel

96.00
 

96.00
 

96.00
 

96.00
 

Vacuum Breaker
For hand-held shower. Fits between flexible hose and diverter valve. Required by plumbing code.

79-P606

Brass

Chrome

Nickel

Br. Nickel

Oil Rub Bronze

Vacuum Breaker

21.00 

21.00

21.00

22.00

21.00

Number

Description

Brass Coated

Chrome (C)

Nickel (N)

(Use Finish Code for Chrome and Nickel)

Compression Coupling
The coupling at the left can be used to connect any two 5/8" tubes together. Uses may be to raise the height of your shower riser or to extend the length of a ceiling support. The compression couplings can also be used to repair two-piece risers that leak at the thread. No threading is necessary as these couplings can be installed with two adjustable wrenches. You may have to cut off the leaky thread with a hacksaw and leave a smooth surface for the brass ferule to connect to. Use soap on the threads of the coupling and ferrule to help break down the friction for easier tightening of the nuts.

77-CC

5/8" Compression coupling

12.95

-

15.95

Miscellaneous Couplings, Styles may vary

79-63

3/4" FIP x 1/2" MIP

8.00

8.00

10.00

05-6688

1/2" Comp x 1/2" FIP

4.95

-

7.95

05-6888

1/2" Comp x 1/2" MIP

4.95

-

7.95

DIVERTER VALVE COUPLINGS
Use these couplings when connecting the diverter valve midway in a 5/8” O.D. shower riser. No threading is necessary.

77-CFIP

5/8" compression x 1/2" FIP

12.95

-

15.95

77-CMIP

5/8" compression x 1/2" MIP

13.95

-

16.95

Brass, Nickel, and Chrome Tubing
5/8" OD brass tubing is threaded one end and can be used for ceiling or wall supports. Add a 10" length to the bottom of your shower riser to increase the height of your shower. Works great to keep the shower curtain out of the bottom of the tub too. Tubing is 3/8" IPS and can be cut to fit with a hacksaw. Fits our 77 series shower ring tees, risers and flanges.

77-WS10

10" (brass is coated)

19.00

12.00

20.00

77-WS18

18" (brass is coated)

26.00

21.00

27.00

77-CS30

30" (brass is coated)

41.00

35.00

43.00

77-CS48

48" (brass is coated)

66.00

56.00

75.00

77-CS60

60" (brass is coated)

90.00

80.00

114.00