|
Original Tub Foot Information:
Due to the large number in our collection,
it is impossible to list or picture feet individually.
It is important to understand that tub feet are not standardized:
Different makes and models of tubs use different mounting schemes and hardware to attach the feet to the tub.
There is no “standard size” tub foot!
Ordering Information:
In order for us to find matching feet for your tub, we will first need a digital (.jpg or.bmp format please) picture of one of the mates to the
missing or broken foot along with written dimensions of the foot. DO NOT
hold the tape measure next to the foot and expect us to extrapolate the dimensions from a blurry picture that’s not taken from the appropriate angle. (Yes, we need you to do your homework!) Send this information to jim@deabath.com. Sorry, the casting numbers on the bottom of the tub DO NOT
help. He will look at the foot and determine if you need to send it in to us for matching. If your tub is missing all four feet, please click HERE. Please note that some tubs use differently-sized
feet at one end to facilitate drainage. (Try swapping feet to different mounting locations to determine if all four feet are identical.) If it appears that the tub has differently
sized or shaped feet at one end, we will need one foot from each end of the tub. Packing and shipping instructions are near the bottom of this page.Note: Pictures of feet
submitted via FAX or email may be used for preliminary evaluations but are not a suitable substitute for actually sending a sample!
Though we have nearly a 75% success
rate finding replacement feet, we can’t guarantee that we will find a match, only that we will try our best. If a suitable foot or set of feet cannot be found we can use
your sample foot as a pattern to have new feet cast from iron or brass.
Original feet will most likely have rust and/or old paint on them but are guaranteed to be sound.
We can sandblast and paint the feet for an additional charge.
|
