1920’s Crane “Rugby” Corner Sink
Powdercoat refinished, and a very unique design. This sink measures only 15” along the edge and has a drain hole through the top to drain the cast-in soapdish. Sink will require single basin taps. There are a couple flaws in the powdercoating, they will be repaired, but visible. Cool old cast iron sink, don’t let it get away!
OCS09700 Corner sink 595.00

Early Kohler Cast Iron corner sink
The square holes in this sink give it’s age away. It isn’t date-stamped, but square holes in a cast iron sink usually mean it was made before 1915. This sink has been refinished, and normally we’d get $600 for something like this, but the sink was badly pitted before it was powdercoated, and the pits are showing through giving it a dimpled appearance. It measures 16” along the wall and has a max. depth of 22”. A soapdish and overflow cover will be supplied in your choice of either Nickel or Brass
OCS0700 495.00  

1925 Kohler Cast Iron Corner Sink
It’s unusual to find cast iron sinks that are this early that do not need to be refinished. This sink does show some wear, especially in the basin where leaky faucets etched the porcelain. There are a couple small chips on the top of the back splash, but these will be covered with caulking once installed. 16” along edge, extends out 21”
OCS09500 Kohler sink 295.00

1918 “Standard” Cast iron Corner sink
Powdercoat refinished and ready for another 90 years of service! The model name is “Everitt” and the sink measures 16” along the sides, and extends out 22”. This sink will require single basin taps, but will be supplied with a nickel plated soapdish and chainstay. Truck freight only!
OCS09701 Cast iron sink 595.00

WW1 vintage “Standard” Corner sink
No date code, but the metal overflow cover places it somewhere during WW1. Powdercoat refinish over cast iron, this sink is ready to go for another 50 years. Original soap dish and overflow cover have been replated in Polished Nickel. Measures 16 1/2” along the back, and extends out 22 1/2”. Separate basin taps will mount on the 5 3/4” centers. Truck freight only!
OCS09900 C.I. sink SOLD