Porcelain over Steel Soap Holder
Unique!  “Seife” means soap in German, there are no markings on the piece, but from the design, we’re thinking 1930’s.  Lots of wear on the bottom of the Sand container, many other chips throughout the piece, but we’ve seen nothing like it.  Measures 15” long and extends out 6”.  Don’t let it escape!
CA10307 Soapholder 135.00

Apothecary Cabinet Knobs
Probably dates to the 1880’s!  Incredibly rare, hand painted, these knobs will fit drawer fronts with a minimum thickness of 7/8” and a maximum thickness of 1 5/16”.  The knobs themselves are 1 5/8” by 1 7/8” and will protrude out from the cabinet a maximum of 1 1/2”.  12 in all, will not split up the set.
CA10700 Cabinet knobs 995.00

click on photo for larger view

Light Blue Art Deco Tile-in Paper Holders
New-old stock, never installed.  Measures 5” by 6 3/4” and they extend out 2”  No name of maker on them, plastic rollers not original.  One in the rear of the picture does have crackle in the glaze, the one in the foreground does have a crack right through the middle, crack does not go all the way through the piece.
CA09602.1 T.P. holder, cracked 20.00
CA09602.2 Same, crackle in glaze, SOLD

3x6 Subway Tile Toothbrush Holder
These accessories are getting very hard to find!   This particular holder has a small chip from it being salvaged, and it’s got some mortar on the back.  Remember, most modern toothbrushes will NOT fit the holes!
CA0702 3x6 Toothbrush holder  35.00

“Standard” brand Toothbrush/Tumbler holder
 We have the matching Console sink in our waiting for shop work area.  This burgundy toothbrush holder dates circa 1950.  Overall dimensions are 2 3/4” X    5 1/8”. Note, Modern toothbrushes will not fit in these older holders.  Tumbler not included.
CA0607 $35.00 

Subway tile Toilet Paper holder
No name on this one, overall nice condition with just one chip on the face just above where the roller mounts on the right side.  It’s practically invisible unless you are 6” away from unit.  This measures 6 1/8” square, and is a mortar-in holder.  Roller is not original, but is of the type that would have been there.
CA120100 T.P. holder 90.00

“Fairfacts Co. #F402” Soapdish
Here’s something different!  It’s not unusual to find a soapdish combined with a cloth holder, or a toothbrush holder combined with a Tumbler holder, but this is a combination soapdish toothbrush holder!  We’ve not seen one like it before.  Salvaged, with a couple of grain-of-rice sized chips along edge.  Measures 3” by 9”, so it’ll work with Subway tile.  Extends out 3”.  Note, many modern toothbrushes will not fit well...
CA08708 Holder/dish combo 149.00

Cast Iron Soap Holders
Powdercoated!  These rare soap holders are a work of art, dating back to the turn of the 20th century,and they are intended to be tiled in.  They measure 7 1/2” by 4 1/2” and will need a recess measuring 4 3/4” by 2 1/2”.  Three available, and then that’s it!
CA120101 135.00