Flush Ell for low tank toilets with tank mounted on the wall.
2" x 6" x 8" plated or polished brass 90 degree flush ell with matching slip-joint nuts & washers. May be cut to fit.
81-197L Coated Brass Flush Ell 90 degree 88.00   
81-197C Chrome Flush Ell 90 degree 70.50    
81-197N Nickel Flush Ell 90 degree 88.00   
81-197BN Brush Nickel Flush Ell, 90 degree 88.00
81-197UB Uncoated Polished brass Flush Ell, 96.50

Extended Flush Ell for low tank toilets with an oddball rough-in application.  Measures 2” x 8”x 10”, supplied with nuts and washers.
15-810B Polished Uncoated Brass Flush Ell 135.00
15-810LB Coated Brass Flush Ell 165.00
15-810N Polished Nickel Flush Ell 185.00
15-810C Polished Chrome Flush Ell 195.00              

Top Spud Offset Flush Tube for low tank toilets with inlet hole in top of the bowl and tank mounted on wall offset flush ell, 2" Diameter x 1 7/8" offset x 6" tall with friction nuts & washers. Note; offsets can vary by 1/4” either way
73-39 Brass Top Spud Flush Tube 109.00   
73-39C Chrome Top Spud Flush Tube 89.00
73-39N Nickel Top Spud Flush Tube 99.00  
 

Top-Spud “Oddball” Offset Flush Elbow
2” diameter, 6” tall, varying offsets. Supplied with nuts and slip-joint washers. These haven’t been made in years, and this is a limited production run. Used when top-spud tank and bowls don’t line up using the standard offset ell.

2 1/2” offset in Raw Brass shown at left

RARE MADDOX SPUD FOR TOP OR REAR SLOTTED SPUD HOLE TOILETS
Spud thread is 2 5/16" dia. and has two tabs that lock the spud in place. Spud length is 2". Complete with tapered rubber washer, brass friction ring, lock nut and 2" friction nut and washer.
24-MS Brass Maddux Spud, uncoated 85.00         
24-MSB Brass Maddux Spud, lacquered 95.00     
24-MSN Nickel plated brass Maddux Spud  120.00        
(Standard spuds may be found on our Toilet Parts Page 1.)

Pilltank Toilet Tank Cast Iron Bracket
So, you found a wonderful old round toilet tank at the salvage yard, got it home, and went to install it and discovered that it required a special bracket that supported the tank through one hole in the

Replacement Flush & Fill tubes for High Tank toilets.

PULL KNOBS
Porcelain Knob for pull chain
79-S166L Polished brass 32.50   
79-S166C Chrome plated 35.00 
79-S166N Polished Nickel 39.50 

Wood Pull Knob
76-KNOB Unfinished oak, polished
brass eye loop.  15.95         
 PULL CHAIN GUIDE
Use this guide to hold knob and chain to prevent knob from swinging. (Polished & lacquered)
15-GUIDE Polished brass 79.00 
15-GUIDEN Nickel 129.00 
 
Chains for guides and pulls sold separately on our
“Toilet Parts, Page 1”
We also have Original Antique Toilet Pulls. Click Here .

79-S166  76-KNOB

Thomas Crapper & Co. High Tank Toilet Pull
Premium Porcelain Pull reads: “Pull and Let Go.”
Rubber bumper prevents damage should pull swing and hit wall or flush pipe. 30” folded link chain, finest quality, the same look and feel of originals that cost twice as much. Add a classic touch to your high tank water closet.
37-231C Chrome 235.00
37-231N Nickel 235.00 
37-231B Brass 235.00
 
Note; these are a more antique white, not the brighter Modern white
More Genuine Thomas Crapper items, click here!

SEAT BUMPERS & PIPE SUPPORTS
A practical, attractive way to keep the toilet seat from denting your high tank flush tube. Keeps pipes aligned to prevent leakage. Distance from wall to pipe is adjustable from 3/4" to 4".
1 1/2" inside diameter
24-97BN Brushed Nickel 55.00   
24-97LB Coated Brass 48.00 
24-97C Chrome 50.00       
24-97N Nickel 55.00        
1 1/4" Inside diameter
24-98BN Brushed Nickel 51.00 
24-98LB Coated Brass 46.00 
24-98C Chrome 48.00       
24-98N Nickel 53.00         

CERAMIC BOLT CAPS
Hard to find ceramic bolt caps cover those ugly closet bolts. SIX styles to choose from. The small round cap will usually fit the narrow front ledge on a turn-of-the-century toilet.
79-S244 Small round 1" diameter 6.00         
79-S265 Large round 1 3/8" diameter 6.00    
6-LO Large oval 1 3/4"x 1 1/4" 6.00           
6-OR Octagonal round 1 1/4" diameter 6.00   
6-OO Octagonal oval 1 3/4" x 1 3/8" 6.00     
79-S245 Hexagon small round. 1-1/8” OD. 6.00

Use the 15-WR on old bowls with the horn that extends below the floor.
 Our solid brass closet screws and bolts won’t rust or corrode like the cheap plated-steel hardware store variety toilet bolts!

REPLACEMENT SEAT BUMPER
WITH SCREWS FOR SECURE FASTENING
 
20-319 2 1/2” long x 7/8” wide x 3/8” high
black, each 4.95
TACK BUMPER
20-20 5/8" diameter, black, each .89
20-61 5/8” diameter, white, each .89