OLD TIME MORTISE LOCK AUTHENTIC MORTISE REPLACEMENT
Replaces most interior mortise locks used in the early 1900s. Skeleton key (bit key) operated. Bright brass plated finish, includes two keys. Reversible
for left or right hand applications. Includes standard 9/32" spindle and 1" x 4" strike plate. 2 1/4" diameter round knobs. Face plate is
1"x 6" long. Spring latch has a 3/8" throw; 1/2" throw deadlock. Mortise cut out is 4 1/8" high x 3" deep. Easy to
install- screws included. 2-1/4” Backset. 88-3460 Mortise Lock keyed both sides 27.95 88-44610 w/ thumb turn one side, no keys 27.95 (Thumb turn latch may be opened from outside with small screwdriver in case of accidental lock-in.)
Glass Knob Brass Mortise Lock Same as above set except with glass instead of brass
handles. Available keyed both sides with 2 keys or with thumb turn (pictured.) Mortice cut out is 3 1/8” tall by 3 1/4” deep, strike plate is 1” x
4”. Face is 1” by 5 1/2”. Thumb turn latch lockset may be opened from outside with a small screwdriver in case of accidental lock-in. 88-44622
Glass knob mortise lock w/ thumb turn 29.95 88-44621
Glass knob mortise set, keyed 2 sides 29.95
Note’ the above lockset is NOT chrome, it’s polished brass!
Arts and Crafts Mortise Entry Set This is a faithful replica of an original set
dating back to the turn of the century. Made of Cast Iron, the mortise itself measures 4” tall by 3” deep and is 5/8” thick. Door plates are 1
5/8” by 6”, knobs are 2 1/8” diameter, decorative strike is 7/8” by 4 5/8”. Comes with two keys and additional strike plates for greater
security. Latch is reversible, sold less screws, cast iron is uncoated. 32-83 Mortise set 99.50
Ornamental Rim Lock w/ Skeleton Keys An exact copy of a late
1800’s original, the detail lines are so crisp, it’s hard to believe it’s not original. Made for doors that are too thin for a normal mortise
lock. Box is 3 3/4” high by 3” wide, Decorative Rose is 2 1/4” diameter. Sold less screws. Made of uncoated cast iron. Combine
this with some of the below antique knobs to make your home unique! 32-64 Rim Lock 69.00
Plain Steel Rim Lock A once common fixture, these have become hard to
find. Not anymore! Black painted steel, accepts most knobs, either antique or reproduction with a 5/16” square spindle. Box measures 3 3/4”
high by 3 1/8” wide, strike box is 3/78” by 3/4”. Knob rose is 2 1/2” in diameter. Supplied with two keys, You’re on your own
for screws. 32-62 Steel rim lock 50.00
GLASS DOOR KNOBS These glass door knobs are a great
replacement for old, worn knobs. Standard 9/32" spindle will fit most locks and is 3 1/2" long. Crystal knob is 2" in diameter and has a
brass plated base which will fit a 5/8" socket. Use with escutcheons and latches sold separately above or as replacement for broken originals. 05-380
Crystal Knob and Spindle Set 15.95
Hard-to-Find Parts for Old Mortise Locks
KEYHOLE PLATES The ideal replacement keyhole
plate for mortise locks. Made of solid polished brass, includes nails. Measures 1-5/32" wide by 1 1/2" high. 04-E2B
Keyhole Plate, pair 5.46 THUMB TURN Solid brass thumb turn comes
complete with brass screws. 3/16” square shank is 1 1/4" long. . 04-L30A Thumb Turn 11.50
Door Knob Rose Solid Brass replacement door knob roses,
2-1/2” outside diamete, 5/8” inside diameter. Clear protective coating. Four screws included, compatible with most
knob sizes. 91-1141 Brass Rose, pair. 9.85
Replacement Trim for Old Mortise Lock & Passage Sets.
REPLACEMENT SPINDLE Steel 9/32" square spindle is 3 1/2" long with a 3/8"-20 thread. The two solid brass set screws are 9/32" long with
1/4"-20 thread 88-245 Spindle Set 4.50
HEADLESS BRASS SCREWS 5/16" long by 1/4"-20 thread. 91-760-02 Brass Spindle Screw .50 91-760-02-25 Bag of 25 Screws 7.50
HEADLESS PLATED SCREWS Brass plated steel, 3/8" by 1/4"-20 thread.
91-760-03 Plated Spindle Screw .60 91-760-03-25 Bag of 25 Plated Screws 8.95
OVAL BRASS PLATED SCREWS Brass plated oval
head steel screw fits many old rim lock spindles. 3/8" long, 9mm-24 thread. 91-760-04 Plated Spindle Screw .60 91-760-04-25 Bag of 25 Oval Screws 8.95
STRIKE PLATE Hard to find strike plate fits old style mortise locks. Made of brass plated steel. Measures 7/8" wide by 3 3/8"
long, spacing of openings is 11/16", center to center. Screws included. 91-733 - 4.50
Original Mortise Knob Sets Not Reproduction! These sets will have
the dings and dents of many years of use. Best go first! Please indicate width of spindle in “Special Requests” field during checkout. Most
are 9/32”. Steel portions of knob might have light rust or paint. Sold in a set. OBK Black knob set 25.00 OWK White knob set 25.00
Original Glass Mortise Knob Sets Fix up that old door with a set of original
knobs! Brass will be original, not repolished. Some sets may have paint splatter, please indicate width of spindle in “Special Requests” field during
checkout. Most are 9/32”. Sold in a set, best goes first. OGK Glass knob set 35.00
Old Brass Mortise Knob Sets These knob sets have great patina, and we didn’t
dare polish that off.... Spindle measures 5/16” square. Knobs themselves have a series of concentric steps in them to supply good grip and adds a nice Deco
flair We think ‘30’s vintage. Sold in a set, several sets available OMK Metal knob set 70.00
Please note, all of the above antique knobs are sold in sets. A set consists of two knobs, and one spindle
