New!!!!!
Advanced Search
Click here!

 

Home

 

Site Index

 

Original Antiques

 

Tubs

 

Crane Plumbing Parts

 

Shop Services

 

Thomas Crapper

 

Showers

 

Toilets

 

Sinks

 

Faucets

 

Specialty Plumbing Parts

 

Ceramic Accessories

 

Door, Window & Cabinet Hardware

 

Lighting

 

Cleaners & Polishes

 

Books

 

Antique Keys & Locks

 

Brass Decor & Bath
Accessories

 

About Us

 

Ordering & shipping Information

 

BARGAINS

 

Touch & Flow Faucets

 

Ifo Toilets & Parts

 

Copper Sinks & Decor

some of the products sold on this website may contain one or more chemicals known to the state of California to cause cancer, birth defects, or reproductive harm

Overstock Sale
on many of our
Polished Brass
Shower
Curtain
Rods!
Click Here!

overstock1

 

Standard Clawfoot Tubs

Tub Faucets

Tub to Shower Conversions

Slipper and Sidefill Tubs

Tub Feet

Tub Supplies & Drains

Super Deluxe Tubs

Tub Accesories

Shower Heads

Tub Drains & Supplies

LIFT & TURN CLAWFOOT TUB DRAIN
Full size heavy 17 gauge tub drain fits old and new claw foot tubs. Supplied with an old-fashioned chain and rubber stopper and a lift and turn giving you a choice.
 1 1/2" tubing. Box flange included. Maximum length from center of overflow to center of tee is 18". Tail piece to floor is 4". Tub shoe tail piece is 9-1/2". Tub drain flange is 2 3/4" in diameter. Tub drain outlet is 1 7/8" in diameter.
 

59-8802

Chrome plated brass

149.00

 

59-8803

Lacquered polished brass

145.00

 

59-8804

Polished nickel drain

169.00

 

59-8805

Brushed nickel drain

179.00

 

        Click Here for Rough-in Diagram

Note; the above dimensions for the 59-8802 chrome version are slightly different, the tub shoe is 20” overall, with a 21” overflow tube and a 5 1/2” tailpiece.

Tub Drain for Older Tubs
1 3/8" connected waste overflow comes with 1 3/8" x 1 1/2" nut for connection to your 1 1/2" trap adapter. 12" tailpiece and flange. 1 3/8" tubing, 15" from center of overflow to center of drain tee. 2 3/4" drain flange diameter. 5 1/2" long tub shoe. Chain and stopper only.

79-P07ES Lacquered Polished Brass  190.00 
79-P07EC  Polished Chrome         190.00 
79-P07EN  Polished Nickel          190.00 
79-P07EOB  Oil Rubbed Bronze       217.00 
 addtocartmini  
Click Here for Rough-in Diagram

Toe Tap Version of the Above P07E 1 3/8” Drain
Same dimensions as above, but with toe tap drain closure
79-P07TELB Coated Polished brass 202.50          
79-P07TEC  Polished Chrome 202.50              
79-P07TEN  Polished Nickel 202.50               
79-P07TEOB Oil Rubbed Bronze 225.00            
79-P07TEBN Brushed Nickel 225.00              
addtocartmini
 

TEMPERATURE CONTROL VALVE
A temperature control valve for use on two and three valve shower sets. This automatic pressure-compensating valve is a highly sensitive pressure-balancing valve that holds a selected water temperature to within one degree, regardless of incoming pressure changes. For use where a flushing toilet or other water use causes temperature changes at the shower. Fittings shown can take the place of tub supplies on most claw foot tubs. The valve is not adjustable and is cast brass, supplies are stainless steel. 1/2" IPS inlet, 3/4" IPS outlet. Stop valves sold separately. Length of assembly is 14". Must be installed with access.

75-PCVA Tempura Assembly 199.00 addtocartmini

75-PCV Tempura Valve only 139.00   addtocartmini

Access Panel
Provides code-required access to pressure balancing valve above when installed inside walls. Multiple uses include access to shower and shut off valves, drain cleanouts, and for covering holes in walls left over from plumbing repairs. White textured high-impact plastic is attached to drywall or paneling with adhesive. Paintable. 12” x 12” snap-in door in 16” x 16” frame.
05-640 access panel 19.99
  addtocartmini

BALL 90 FREESTANDING TUB SUPPLY SET
Allows you to position the faucet close to the end of the tub. Supply set without faucet. Includes floor flanges, escutcheons, two straight stops with union joint and porcelain lever handles, 12” wall braces with 2” dia. wall flange and 3/4” supply nuts to fit 79-series faucets. Max height 25-1/2”. Faucet nut to center of ball is 5-1/2”. Custom heights and lengths available.

79-P641S

Polished & Coated brass

525.00

79-P641C

Polished Chrome

525.00

79-P641N

Polished Nickel

525.00

79-P641BN

Brushed Nickel

607.50

 

Supply Brace
Connects supplies to 1 3/8" tub drain. (Note: must be used with 79-P641 or 79-398 tub supply, cannot be used alone)

79-P616  Brass  46.00 
79-P616C Chrome 46.00 
addtocartmini
 

FREESTANDING TUB SUPPLY SET
Supply set without faucet includes two straight stops with porcelain lever handles, 3" diameter. floor flanges, 12" wall braces with 2" diameter wall flange, 24 1/2" high supply tubes, 3/4" supply nuts. Designed to fit 79-Series faucets with Union nuts but can be adapted to fit any tub valve with regular 3/4” IPS square shanks.

79-398S   Coated Brass. 495.00  
79-398C Polished Chrome 495.00
 
addtocartmini
 

SINGLE OFFSET TUB SUPPLIES
Single Offset Tub Supplies Set of two, 22" long 1/2" supply tubes, with nuts and washers, shown above left. Includes 1/2” O.D bell flanges for installations without stop valves. For installations with shut off valves and flanges as shown in picture, order valves and corresponding escutchons from our Stops & Flanges page.

81-188

Lacquered brass

116.00

81-188C

Polished chrome

67.00

81-188N

Polished nickel

116.00

81-188BN

Brushed nickel

116.00

addtocartmini 

Click Here for Rough-in Diagram

DOUBLE OFFSET TUB SUPPLIES
Set of two, 22" long 1/2" supply tubes, with nuts and washers, shown at right. 7 1/2" spread at bottom. Includes 1/2” O.D bell flanges for installations without shut off valves. For installations with shut off valves and flanges as pictured, order vales and the corresponding escutcheons from our
 Stops & Flanges page.
 

81-189

Coated brass

119.00

81-189C

Chrome plated

85.00

81-189N

Polished Nickel

119.00

81-189BN

Brushed Nickel

119.00

addtocartmini 

Click Here for Rough-in Diagram

79-63C

Bathcock Couplings, 3/4" FIPS x 1/2” MIPS

Brass 90 degree Coupling

90-0625

 34.00 pair 

addtocartmini

Chrome 90 degree Coupling

90-0625C

 24.00 pair

addtocartmini

Brass Straight Coupling

79-63S

 8.00 each. (Order 2 for one tub valve)

addtocartmini

Chrome Straight Coupling

79-63C

 8.00 each (Order 2 for one tub valve.)

addtocartmini

We carry a full line of finished pipe nipples and fittings. Click Here.

To Install your tub you will need:
One Tub Drain
 One Set of Tub Supplies
 Two Straight Stop Valves
 Two Flanges
You will need to know the type of water supply pipe to your bathroom:
plastic, threaded galvanized pipe or copper

Pressure Balance Clawfoot Tub Supply
Set up for 8” centers, will fit most 3 3/8” drilled on center clawfoot tubs. Comes with 1/2” pipe inlet wheel handle or ball tip stops, pictured 79-P07 tub drain sold separately.
Below supplies with Wheel handle Stops
79-P0554C Chrome / Wheel stop 375.00
79-P0554S  Coated Brass / Wheel stop 375.00
79-P0554N  Pol. Nickel / Wheel stop 375.00
79-P0554BN Brush Ni. / Wheel stop 405.00
addtocartmini
Below supplies with Ball tip Stops as pictured in inset
79-P0554XC Chrome / Ball tip stop 384.00
79-P0554XS Coated brass / Ball tip stop 384.00
addtocartmini
 

p0554

STANDING WASTE FOR OLD SIDE END FILL TUBS
2" waste tube is chrome plated brass with chrome lift knob for stopper. Waste Tee, tub shoe and tailpiece are brass. Drain grid is stainless steel. Available with 1 1/2" male or female IPS outlet at Tee. Chrome plated steel flange included.
 90-14030 Standing Waste with male outlet 95.00    addtocartmini
 90-14032 Standing Waste with female outlet 95.00  addtocartmini

STANDING WASTE TUB FAUCET
 discontinued, but we can rebuild your existing parts.
Click Here for More information on Standing Waste Valves

24-38

OLD STYLE SIDE TUB SHOE
Tub Shoe has a 1 3/8" tail piece. 11" from center of drain to end of tube. 1 3/4" drain thread, 2 3/4" dia. flange.
75-38C Tub Shoe, chrome plated brass 34.00 addtocartmini

90-612

SELF CLOSING SHOWER VALVE
Lever operated valve for outside showers.
90-612 Chrome plated brass, 1/2" FIP inlet and outlet. 39.00 addtocartmini

81-175A

TUB OVERFLOW ADAPTOR KIT
Convert trip lever to old-style chain and stopper
81-175AC Chrome plated 21.50 
81-175AN Nickel plated 31.50   
81-175ALB Polished coated brass 55.00  
addtocartmini
 

BATHROOM MACHINERIES OVERFLOW COVER
A heavy cast brass overflow cover just like those from the good ol' days. Early 20th century plumbers and suppliers- Wolverine Brass, San Francisco, Cal.; Hammond Plumbing Co., Hammond, Ind.; and Standard Mfg.; all had their own overflow covers. The same is available now with the Bathroom Machineries name. These heavy covers will not bend like today's lighter weight ones. 3 1/4" diameter
79-01B Unlacquered brass overflow cover 15.00 
79-01S Brass Overflow Cover, lacquered  19.00 
79-01C Chrome Plated Overflow Cover   19.00 
79-01N Polished nickel overflow cover    19.00 
addtocartmini
 

79-01

STOPPER KEEPER Overflow cover. 3 1/8” dia. Solid Porcelain Overflow Cover not only stores your stopper, it adds an inch or more depth to your tub!.   79-P644 15.00  addtocartmini

Shower and Tub Drain Parts

81-175

81-175

81-175SO

81-175SO

81-175SC

81-175SC

81-182

81-182

81-1833

81-183

81-185

81-185

81-184

81-184

Catalog
Number

Description (Finish Code)

Chrome
Price

Nickel
Price

Coated Brass Price

81-175

Overflow strainer with bolt and ring, beaded chain

 15.50

 49.00

 49.00

addtocartmini

81-175SO

Overflow strainer only

 7.00

 15.50

 15.50

addtocartmini

81-175SC

Beaded chain and stopper only

 7.50

29.00

 29.00

addtocartmini

81-182

Overflow bolt and ring for use with 81-175

 6.80

 9.95

 9.95

addtocartmini

81-183

Bathtub strainer body & three-prong strainer

 20.00

 24.00

 24.00

addtocartmini

81-184

Three-prong strainer only for bathtub drain

 3.00

 9.00

 9.00

addtocartmini

81-185

Lift and turn bath plug, 1 5/8" O.D. thread

 10.50

 30.00

 30.00

addtocartmini

Some of the above fittings are available in uncoated brass. Special order only!

81-030

81-030

81-043

81-043

75-42150

90-3004

SHOWER DRAIN PARTS

Catalog
Number

Description (Finish Code)

Chrome
Price

Nickel
Price

Coated Brass Price

81-030

Trim set: grill, crown, screws for PLUMBING PRODUCTS drains

 13.00

34.00

 34.00

addtocartmini

81-043

4 1/4" Strainer, fits Casper drain receptor below. measures 2 7/8” between prongs

 13.00

 18.50

 18.50

addtocartmini

90-3004

 Rough Brass CASPER Receptor Shower Drain. Chrome grille.

 32.00

Add above grille if finish

other than chrome is desired

addtocartmini

Other finishes and styles of shower drains available on a special order basis

DEEP WATER BATH
Enjoy the luxury of a deeper, warmer bath. Simply attach over your overflow plate to add up to 20% more water. Easy to use- no installation. Made of vinyl with fungicide to resist mildew. 4” inside diameter, 6” overall diameter.
18-3884 Deep Water 10.50  addtocartmini

100% Satisfaction Guaranteed

Call 1-800-255-4426 to Order

View Cart

Checkout

footer3