Tub Drain for Older Tubs
1 3/8" connected waste overflow comes with 1 3/8" x 1 1/2" nut for connection to your 1 1/2" trap adapter. 12" tailpiece and flange. 1 3/8" tubing, 15" from center of overflow to center of drain tee. 2 3/4" drain flange diameter. 5 1/2" long tub shoe. Chain and stopper only.
79-P07ES Lacquered Polished Brass  190.00
79-P07EC Polished Chrome         190.00 
79-P07EN  Polished Nickel          190.00 
79-P07EOB  Oil Rubbed Bronze       217.00
Shipping Wt.- 5# Click Here for Rough-in Diagram

Toe Tap Version of the Above P07E 1 3/8” Drain
Same dimensions as above, but with toe tap drain closure
79-P07TELB Coated Polished brass 202.50          
79-P07TEC  Polished Chrome 202.50              
79-P07TEN  Polished Nickel 202.50               
79-P07TEOB Oil Rubbed Bronze 225.00            
79-P07TEBN Brushed Nickel 225.00              

TEMPERATURE CONTROL VALVE
A temperature control valve for use on two and three valve shower sets. This automatic pressure-compensating valve is a highly sensitive pressure-balancing valve that holds a selected water temperature to within one degree, regardless of incoming pressure changes. For use where a flushing toilet or other water use causes temperature changes at the shower. Fittings shown can take the place of tub supplies on most claw foot tubs. The valve is not adjustable and is cast brass, supplies are stainless steel. 1/2" IPS inlet, 3/4" IPS outlet. Stop valves sold separately. Length of assembly is 14". Must be installed with access.

75-PCVA Tempura Assembly 199.00 

75-PCV Tempura Valve only 139.00  

Access Panel
Provides code-required access to pressure balancing valve above when installed inside walls. Multiple uses include access to shower and shut off valves, drain cleanouts, and for covering holes in walls left over from plumbing repairs. White textured high-impact plastic is attached to drywall or paneling with adhesive. Paintable. 12” x 12” snap-in door in 16” x 16” frame.
05-640 access panel 19.99  

Supply Brace
Connects supplies to 1 3/8" tub drain. (Note: must be used with 79-P641 or 79-398 tub supply, cannot be used alone)

79-P616  Brass  42.00 
79-P616C Chrome 42.00 

FREESTANDING TUB SUPPLY SET
Supply set without faucet includes two straight stops with porcelain lever handles, 3" diameter. floor flanges, 12" wall braces with 2" diameter wall flange, 24 1/2" high supply tubes, 3/4" supply nuts. Designed to fit 79-Series faucets with Union nuts but can be adapted to fit any tub valve with regular 3/4” IPS square shanks.

79-398S   Coated Brass. 450.00  
79-398C Polished Chrome 450.00  

BATHROOM MACHINERIES OVERFLOW COVER
A heavy cast brass overflow cover just like those from the good ol' days. Early 20th century plumbers and suppliers- Wolverine Brass, San Francisco, Cal.; Hammond Plumbing Co., Hammond, Ind.; and Standard Mfg.; all had their own overflow covers. The same is available now with the Bathroom Machineries name. These heavy covers will not bend like today's lighter weight ones. 3 1/4" diameter
79-01B Unlacquered brass overflow cover 15.00 
79-01S Brass Overflow Cover, lacquered  19.00 
79-01C Chrome Plated Overflow Cover   19.00 
79-01N Polished nickel overflow cover    19.00 

STOPPER KEEPER Overflow cover. 3 1/8” dia. Solid Porcelain Overflow Cover not only stores your stopper, it adds an inch or more depth to your tub!.   79-P644 15.00 

81-175

81-175SO

81-175SC

81-182

81-183

81-185

81-184

81-030

81-043

90-3004

DEEP WATER BATH
Enjoy the luxury of a deeper, warmer bath. Simply attach over your overflow plate to add up to 20% more water. Easy to use- no installation. Made of vinyl with fungicide to resist mildew. 4” inside diameter, 6” overall diameter.
18-3884 Deep Water 10.50