Authentic Thomas Crapper & Company Sanitaryware

Today- Thomas Crapper & Co. are again producing the finest bathroom ware. Ninteenth-century designs are combined with current knowledge to create extrordinarily authentic fittings. To accompany this sanitaryware, T.C. & Co along with Bathroom Machineries now offers a range of Bathroom Preparations and Requisites to our U.S. customers, made from natural products in the traditional way.

click here for a rough-in diagram for this toilet

Please note; we supply the Thomas Crapper toilets with a 12” rough American bowl. While we can special order the Crapper bowl, it is not approved for use in the U.S. If you are having your job inspected, the Crapper bowl will not pass!

Complete Toilet with Thomas Crapper & Co. Low Cistern
The charming “beer engine” flush lever and tank have been reproduced right down to the syphon type flush valve. Solid Marine Quality Aluminum cistern is ready to paint to match your decor. Includes cast iron “T/C” logo wall brackets, flush tube, fill tube and the exclusive Bathroom Machineries “Lydia” bowl suitable for installation on 11” to 14” rough-in. Seat sold Separately

37-814LKITB Low tank kit, brass 3195.00 
37-814LKITN Low tank kit, Nickel 3195.00 
37-814B Low tank only, polished brass 1565.00
37-814N Low tank only, polished Nickel 1565.00

Thomas Crapper & Co Wall Plaque
the perfect finishing touch to your Thomas Crapper bathroom. Enameled steel wall plaques depict actual engravings from Thomas Crapper & Co.’s 1890 catalog.
Self-adhesive mounting tabs included.
Small Plaque
37-MSS 6” x 7-3/4”  17.50
 

Thomas Crapper & Co. High Tank Toilet Pull
Porcelain Pull reads: “Pull and Let Go.”
Rubber bumper prevents damage should pull swing and hit wall or flush pipe. 30” folded link chain, finest quality. Add a classic touch to your high tank water closet.
37-231C Chrome 235.00
37-231N Nickel 235.00 
37-231B Brass 235.00 

Thomas Crapper and Company
-Original-
14” I.D. Round Inset Basin No. 205
 Made by hand with the usual Crapper & Co. fastidiousness. Bears the Thomas Crapper & Company logo beneath the overflow. Genuine T.C. & Co. Victorian waste assembly with long chain sold separately.

37-205 T.C. & Co. No. 205 basin 751.00

37-823 Victorian Basin Waste Assembly 139.00

Undermount hardware may be found on our
Sink Basins Page.

Thomas Crapper Cloakroom Basin
Perfect for the tiny bath, these sinks measure 20 1/2” wide and protrude out a measly 10 1/4” Sold less pictured pencil neck faucets, brackets and drain. All sold separately or can be substituted with your own. Note, sink requires brackets to support it.
37-861 Cloakroom Basin 895.00

Installation tip; in order to accommodate a highbox flange where the waste arm meets the stub out, one must offset the rough drain outlet 2” to 2 1/2” off the centerline of the sink. Minimum distance from the deck of the sink to the center of the rough waste line is 8”. This will keep the trap tucked under the sink cleanly. Blocking 21” wide by 7” tall is required in wall as well.

Detail shot shows the detail of the Thomas Crapper bracket, Part # 37-736, sold separately for the above sink

Thomas Crapper Sink & Cistern Brackets
Ornamental Cast Iron Brackets with the Thomas Crapper & Company logo. Unusual plain iron brackets with unfinished wood “patras” are the perfect addition to the Thomas Crapper bathroom. Use under high or low toilet tank, as a sink bracket, or under a glass or wood shelf. A classic design for any room or decor. Primered, ready-to-paint with unfinished wood patras.
37-754 Cistern Bracket 7-1/2” high x 7” long, pair 295.00
37-791 Basin Bracket 10” high x 13” long, pair 395.00  
37-736  Cloakroom basin bracket, 4” x 4 3/4”, pair, no logo, 114.00

Thomas Crapper and Company LTD. is a registered trademark of the
Thomas Crapper Company. http://www.thomas-crapper.co.uk/