Pencil Neck Bridge Faucet
Finally, a faucet that will fit those sinks with odd spacings between the holes. The Bathroom Machineries Pencil Neck Bridge Tap is especially well suited for smaller sinks but will fit any sink with 5-1/2” to 16-1/2” between the holes. Simply cut the cross tubes to length and attach the special compression spout. Taps stand 5-1/4” tall, spout extends 4”. 2” diameter base flange allows use on sinks with limited deck space. 7/8” diameter inlet shanks will fit through those odd square holes found on older sinks and marble tops. Cross tube is 1-3/4 above sink deck. Rubber on base eliminates the need to use plumbers putty that may damage marble tops. 

Quarter Turn Ceramic Deco Widespread
faucet replicates the look a classic 1930’s Art Deco design faucet like those made by ‘Standard’ and others. Ceramic cartridges guaranty a long, trouble-free service life. Faucet flange bases measure 2-5/16”, spout base is 2-7/16”. Valve bodies are only 1” diameter allowing installation on those sinks with small holes. Valves will work on sinks up to 1-3/8” thick at faucet hole.
 Pop-up drain flange is 2-1/8” diameter, drain body will fit in drain holes as small as 1-1/2” in diameter.

Quarter Turn Ceramic Widespread Classic Style Faucet
This versatile faucet is available in 3 finishes and 4 handle styles. Rounded lines are reminiscent of the classic designs of the ‘teens’ and twenties. Spout base measures 2-3/4” when installed with stepped trim ring (as shown) or 2” when installed without. Handle flanges measure 2-3/4 when installed with trim rings, 2-3/8” when installed without. Fits 6” to 16” faucet centers

Note: this flange style is NOT available on above faucet set.

Widespread “bridge” tap fits across common 8” and 12” hole spacings on older sinks without a center hole for a mixing spout. Modern mixing faucet convenience with classic styling!

 “bridge” tap spans across holes drilled on 4” centers. Perfect for those older sinks that don’t have center holes. Use with cover plate on new sinks with 3 holes to bring classic styling to a newer fixture.

4” Centerset Gooseneck Faucet
Spout extends 5”, faucet is 8-1/4” high. Flange is 2-1/2” in dia. Lift and turn drain included, cover plate shown in picture not included.
79-P629S 4" centers, Coat. Brass 285.00
79-P629C 4" centers, Chrome 285.00
79-P629N 4" centers, Nickel 285.00 
79-P629BN 4” centers, Brush Ni. 299.00

79-P552 Replacement handles, porc. lever 42.00, pair
Hole Cover . fits under 4” centerset faucet to cover center hole as shown. No holes; we can drill to your specs for addl. chg.
79-P619S Coated Brass 32.00 
79-P619C Chrome  32.00     
79-P619N Polished Nickel 36.00 

        Hole drilling: $10 per hole.

Wallmount Bridge Tap by Rohl
An excellent choice for the new vessel basins. Features quarter turn ceramic valves and swivel spout. Inlets are 1/2” MIP and adjust from 7” to 9” centers. Spout drops 5” from center.
50-1405XC Chrome 596.00        
50-1405XPN Polished Nickel 596.00  
50-1405XSN  Satin Nickel 740.00    
50-1405XIB Inca Brass 740.00      
50-1405XTB Tuscan Brass 740.00    
 

50-1405XTB in Tuscan Brass

Hole cover/chain stay shown not included.

Adjustable Bridge Faucet by Rohl
This adjustable bridge tap is unmatched for quality and versatility. Featuring quarter-turn ceramic valves, this is the perfect solution for those older fixtures with faucet holes at odd spacings. Inlet centers are adjustable from 4” to 9-1/2”. Spout extends 6-1/2” and is 9-1/2” high.
Unique swivel joint design allows this valve to be used on a variety of hard-to-fit fixtures, including corner sinks. May be used as either bath OR kitchen faucet and offers an attractive replacement option for obsolete standing waste & drain valves on tubs with holes drilled in the rim.
50-1419XC   Chrome 746.00           
50-1419XPN Polished Nickel 746.00    
50-1419XSN Satin Nickel 934.00        
50-1419XIB   Inca Brass 934.00         
50-1419XTB Tuscan Brass 934.00